SEM 2000 commutation energy meter Spark damage to commutators in DC rotating machines, can now be minimised by the accurate location of the dynamic neutral axis at any given operating load with the SEM2000. Avoid breakdowns and repair costs Reduce excessive brush wear Reduce operating losses Brush Force Tester Magnetic Field Tester  MMS6000 Profiler PS940 Stroboscope SEM 2000   Whilst your machine’s neutral has most probably been set statically, this is not always the best position for the brush gear when under load conditions. The SEM2000 is an electronic instrument capable of detecting the optimum position for brush gear by measuring the ripple energy produced by commutation at various brush gear positions and establishing the position with lowest commutating energy.        Kit Includes SEM 2000 Spark Energy Meter Kit Technical Data Dim. L x W x H, 200 x 100 x 50 mm 1 Hand-probe  Galvanic separated, max. 1450 Volt DC 1 Cable with BNC-TNC plugs RG 58 ca. 1 m 1 Earthing cable Black 1 Earthing clamp Black 1 Transport case Dim. L x W x H, 260 x 400 x 100 mm   Battery Type AA (4 x 1,5 Volt) 12 Months manufacturers warranty   View our products on our literature page

Morgan Industrial Carbon
Products | Literature | Contact Us | About Us | News | Home
Locations and Addresses

Sydney Tel : 0061 2 9772 5600

Brisbane Tel : 0061 7 5433 7100

Melbourne Tel : 0061 3 9551 2377

Perth Tel : 08 9451 9088

Auckland Tel : 0011 64 9 836 9220

Singapore Tel: +65 6296 0929

Malaysia Tel: (60) 3 - 5569 3990

Morgan Carbon
A Division of Morgan Crucible

sales@morgancarbon.com.au